pressure losses:

The characteristics of PPR type 3 material enable to obtain at the extrusion phase very  smooth  walls (roughness =0.0070) which reduces the friction losses  and  improves  the  performance  of  the  whole system. These factors allow using higher water speed in  the circuits without having negative effects in the system as the case in other pipingsystems.

 

pressure and temperature :

The following table shows the expected life span of Cosmoplast Polypropylene pipes and fittings at various selected pressures and temperatures.

 

  Plain PPR Pipe Composite PPR/AL/PPR

Temperatue

(ºC)

Operating

(Years)

Series 5 

 Series 6

Series 7 

SDR 7, 4

 SDR 6

 SDR 5

 PN16

 PN20

 PN25

Permissible Operational Over pressure PB (bar)

 

 

10   

 1

 28.2

 35.2

44.0 

 5

 26.5

 33.1

 41.3

 10

 25.8

 32.3

 40.3

 25

 25.0

 31.2

 39.0

  50

 24.3

 30.4

 38.0

20  

 1

 23.9

  29.9

 37.3

 5

 22.6

 28.3

 35.3

 10

 22.0

 27.5

 34.3

 25

 21.3

  26.7

 33.3

  50

 20.7

 25.9

 32.3

30

 1

 20.5

 25.6

 32.0

 5

 19.2

 24.0

 32.0

 10

 18.6

 23.2

 30.0

 25

 17.9

 22.4

 29.0

  50

 17.5

 21.9

 28.0

 40

 1

 17.3

 21.6

 27.3

 5

 16.2

 20.3

 27.0

 10

 15.8

 19.7

 25.3

 25

 15.2

 18.9

 24.7

  50

 14.7

 18.4

 23.7

50  

 1

 14.6

 18.3

 23.0

 5

 13.7

 17.1

 22.8

 10

 13.2

 16.5

 21.3

 25

 12.8

 16.0

 20.7

  50

 12.4

 15.5

 20.0

60  

 1

 12.4

 15.5

 19.3

 5

 11.5

 14.4

 19.3

 10

 11.1

 13.9

 18.0

 25

 10.7

 13.3

 17.3

  50

 10.4

 12.9

 16.7

  70

 1

 10.5

 13.1

 16.2

 5

 9.6

 12.0

 16.3

 10

 9.3

 11.6

 15.0

 25

 7.9

 9.9

 14.5

  50

 6.8

 8.5

 12.3

  80

 1

 8.8

 10.9

 10.7

 5

 7.7

 9.6

 13.7

 10

 6.4

 8.0

 12.0

 25

 5.1

 6.4

 10.0

  50

 4.7

 5.9

 8.0

95

 1

 6.2

 7.7

 7.2

 5

 4.1

 5.2

 9.7

 10

 3.5

 4.3

 6.5

  50

 -

 208

 5.4