:: Cosmoplast ::

uPVC PRESSURE FITTINGS

To suit the uPVC pressure pipes, Cosmoplast also manufactures uPVC pressure fittings to both imperial and metric standards. The fittings product range that includes both thermoformed fittings and moulded fittings are manufactured to stringent quality standards as the pipes.

The basic application of formed bends is to provide uniformity in the pipeline system even when the design engineers are faced with obstructions or layout parameters that pose problems to the laying of a conventional network.

Cosmoplast’s pressure fittings are tailor made for specific applications in order to address the design and assembly requirements of the customer. For this, the company manufactures moulded fittings to various sizes besides the above mentioned thermoformed bends.

uPVC fittings are regarded as flexible under stresses set up by backfill and surcharge loads and do not have any adverse effect on normal acid or Alkali conditions. Cosmoplast uPVC fittings are suitable to be used with a wide range of industrial effluents

Listed below are the range of uPVC pressure fittings manufactured by Cosmoplast.

END CAP for solvent welding

	(PN – 16				(PN – 10)
D	L	Z	E	Weight (approx) gms.	L	Z	E	Weight (approx) gms.
20	16	22.5	27.7	12	-	-	-	-
25	19	27	33.8	20	-	-	-	-
32	22	31	41.6	22	-	-	-	-
50	31	43	61.9	50	-	-	-	-
63	38	52	77	82	38	49.5	72	100
75	44	59	91.2	175	-	-	-	-
90	51	69	110	320	51	65.5	103	238
110	61	82	132	590	61	79	126	427
125	-	-	-	-	-	-	-	-
160	86	136	191	1710	-	-	-	-

All dimensions are in millimeters

MALE PLUG (parallel thread)

	(PN16)
G	L	H	S	Weight (approx) gms
3/8”	-	-	-	-
½”	-	-	-	-
¾”	-	-	-	-
1”	-	-	-	-
11/4”	-	-	-	-
11/2”	21.4	38	51	-
2”	25.7	45	80	-
21/2”	-	-	-	-
3”	-	-	-	-
4”	-	-	-	-

All dimensions are in millimeters

FEMALE END PLUG (parallel Thread)

	(PN-16)
G	L	H	E	Z	S	Weight (approx) gms
3/8”	-	-	-	-	-	-
½”	-	-	-	-	-	-
¾”	-	-	-	-	-	-
1”	-	-	-	-	-	-
11/4”	-	-	-	-	-	-
11/2”	21.4	33.5	56.5	10	58	55
2”	25.7	41	70	8	71	89
21/2”	-	-	-	-	-	-
3”	33.3	55	106	12	109	257
4”	39.3	67.5	134	15	138	523

FLANGE

	Flange size	d1	d2	d3	d4	A	B	C	Weight in kg.
1	90	90.3	125	108	86	51	11	5	0.254
2	110	110.4	150	130	105	61	12	5	0.400
3	140	140.5	188	165	134	76	14	5	0.805
4	160	160.5	212	188	153	86	18	5	1.172
5	200	200.5	248	232	192	106	22	7	1.864
6	250	250.5	303	275	240	131	23	9	2.397
7	280	280.6	328	306	268	146	26	9	2.961
8	315	315.8	378	342	302	164	31	10	4.230

All dimensions are in millimeters

FLANGE RING

Sl.	Flange ring	d5	d6	d7	D	N	H	Weight in Kg.
1	90	110	160	200	20	8	18	0.434
2	110	133	180	220	22	8	18	0.522
3	140	167	210	240	26	8	18	0.605
4	160	190	240	280	28	8	22	0.891
5	200	235	272	315	36	8	22	1.251
6	250	277	325	370	36	8	22	1.628
7	280	308	350	395	36	12	22	1.635
8	315	345	400	445	36	12	22	2.0298

All dimensions are in millimeters

ELBOW 90⁰ For solvent welding

D	(PN – 16)				(PN – 10)
D	L	Z	E	Weight (approx) gms.	L	Z	E	Weight (approx) gms.
20	16	11	27	22	-	-	-	-
25	19	14	33	40	-	-	-	-
32	22	17.5	41	65	-	-	-	-
40	26	22	50	110	26	22	46	78
50	31	27	61	150	31	27	57.2	-
63	38	33.5	76	278	38	33.5	72	220
75	44	40.5	90	418	44	40.5	86	320
90	51	48	108	705	51	48	103	510
110	61	60	131	1300	61	60	126	830
125	-	-	-	-	-	-	-	-
160	86	88	191	3470	86	88	183.2	2015

All dimensions are in millimeters

ELBOW 45⁰ For solvent welding

D	(PN – 16)				(PN – 10)
D	L	Z	E	Weight (approx) gms.	L	Z	E	Weight (approx) gms.
20	16	5.5	27	25	-	-	-	-
25	-	-	-	-	-	-	-	-
32	22	7.5	41	57	-	-	-	-
40	-	-	-	-	26	10.5	46	-
50	-	-	-	-	31	11.5	57.2	78
63	38	14	76	203	-	-	-	-
75	-	-	-	-	-	-	-	-
90	51	21.5	107.5	542	51	21.5	103	385
110	61	26	131	800	61	26	126	695
125	-	-	-	-	-	-	-	-
160	-	-	-	-	86	38	183.1	2100

ELBOW 45⁰ For ring seal socket

D	T	L1	L2	L3
110	-	-	-	-
160	4.5	86	86	287
200	-	-	-	-

ELBOW 87.5⁰ For ring seal socket

D	T	L1	L2	L3	L4
110	-	-	-	-	-
160	4.7	98	98	308	326
200	5.9	116	116	365	374

TEE 90⁰ For solvent welding

	(PN – 16)				(PN – 10)
D	L	Z	E	Weight (approx) gms.	L	Z	E	Weight (approx) gms.
20	16	11	27	28	-	-	-	-
25	19	14	33	50	-	-	-	-
32	22	17.5	41	80	-	-	-	-
40	-	-	-	-	26	22	46	-
50	31	27	61	202	31	27	57.2	168
63	38	33.5	76	363	38	33.5	72	252
75	44	40.5	90	-	44	40.5	86	425
90	51	48	109	905	51	48	103	625
110	61	61	133	1630	61	61	126	1225
125	-	-	-	-	-	-	-	-
160	86	88	191	4400	86	88	183.2	2780

All dimensions are in millimeters

TEE 90⁰ For Solvent welding-with the off take socket reduce

DxD 1	(PN – 16)
DxD 1	L	L 1	Z	Z 1	E	E 1	Weight (approx) gms
63x32	38	22	33.5	34	75	40.5	250
63x50	38	31	33.5	34	75	60	270
90x32	N/A	N/A	N/A	N/A	N/A	N/A	N/A
90x40	N/A	N/A	N/A	N/A	N/A	N/A	N/A
90x50	-	-	-	-	-	-	-
90x63	51	38	38	46.5	109	76	830
110x32	-	-	-	-	-	-	-
110x50	61	31	61	62	131	60	1019
110x63	61	38	61	62	131	75	1284
110x90	-	-	-	-	-	-	-

All dimensions are in millimeters

TEE 87.5⁰ For ring seal socket

All dimensions are in millimeters

D	T	L1	L2	L3	L4
110	3.2	65	61	280	126
160	4.7	95	89	407	183
200	-	-	-	-	-

BEND 87⁰

All dimensions are in millimeters

REDUCER BUSHING -For Solvent welding

All dimensions are in millimeters

COUPLER for solvent welding / ring seal socket

All dimensions are in millimeters

COUPLING -ring seal socket

	(PN – 16				(PN – 10)
D	L	Z	E	Weight (approx) gms.	L	Z	E	Weight (approx) gms.
25	19	3	33	28	-	-	-	-
32	22	3	41	38	-	-	-	-
50	31	3	61	100	-	-	-	-
63	38	3	76	180	38	3	72	114
75	-	-	-	-	44	3	86	-
90	51	5	110	410	51	5	103	300
110	61	9	131	690	61	9	126	567
125	-	-	-	-	-	-	-	-
160	86	9	186	1680	-	-	-	-

D	Z	T	L1	L2
110	-	-	-	-
160	4.7	4.5	200	98
200	5.9	5.5	230	112

	(PN-16)				(PN-10)
DxD 1	L	Z	Fig.	Weight (approx) gms	L	Z	Fig.	Weight (approx) gms
25x20	19	3	A	-	-	-	-	-
32x25	22	3	A	-	-	-	-	-
50x20	31	15	B	50	-	-	-	-
50x25	31	12	B	53	-	-	-	-
50x32	-	-	-	-	31	9	B	34
63x32	-	-	-	-	-	-	-	-
63x50	38	7	A	63	-	-	-	-
75x50	-	-	-	-	-	-	-	-
75x63	-	-	-	-	-	-	-	-
90x50	51	20	B	195	-	-	-	-
90x63	51	13	B	205	-	-	-	-
110x50	61	30	B	-	61	30	B	-
110x63	61	23	B	390	-	-	-	-
110x90	61	10	A	290	-	-	-	-
125x110	-	-	-	-	-	-	-	-
160x110	86	25	B	995	-	-	-	-

D	T	L1	L2	L3	L4
110	3.2	71	70	227	163.5
160	-	-	-	-	-
200	-	-	-	-	-

Female / male Adaptor Socket
Female end plain for solvent welding, male end parallel thread

All dimensions are in millimeters

SOCKET(COUPLING)
One end plain for solvent welding, the other end parallel thread

DxG	(PN-16)						(PN-10)
DxG	L	L 1	Z	E	S	Weight (approx) gms	L	L 1	Z	E	S
25x3/4”	-	-	-	-	-	-	-	-	-	-	-
32x1”	-	-	-	-	-	-	-	-	-	-	-
40x11/4”	-	-	-	-	-	-	-	-	-	-	-
50x11/2”	31	21.5	7	61	63	115	-	-	-	-	-
63x2”	38	25.7	7	76	80	193	-	-	-	-	-
75x21/2”	-	-	-	-	-	-	-	-	-	-	-
90x3”	51	33.3	22.7	108	113	520	-	-	-	-	-
110x4”	-	-	-	-	-	-	61	39.4	27.6	126	132

	(PN – 16)					(PN – 10)
DxG	L f	L 1	Z	S	Weight (approx) gms.	L f	L 1	Z	S	Weight (approx)gms
20x1/2”	16	15	24.5	28	14	-	-	-	-	-
25x3/4”	19	16.3	27	36	22	-	-	-	-	-
32x1”	22	19.1	30.2	46	34	-	-	-	-	-
40x1”	-	-	-	-	-	-	-	-	-	-
50x1½”	31	21.4	35.2	63	111	-	-	-	-	-
63x2”	38	25.7	41	80	205	38	25.7	38	80	131
75x2”	-	-	-	-	-	-	-	-	-	-
75x21/2”	-	-	-	-	-	-	-	-	-	-
90x21/2”	-	-	-	-	-	-	-	-	-	-
90x3”	51	33.3	51	113	580	51	33.3	51	-	344
110x3”	-	-	-	-	-	-	-	-	-	-
110x4”	61	39.2	51	132	750	61	39.2	51	-	557